What do I need to know about double-glazed Windows? Modern Windows, regardless of the frame material-wood, aluminum or PVC-have double-glazed Windows. This is a translucent part of the window, which occupies 70-80% of the entire opening. In many ways, it depends on whether your home will be light, warm and quiet. In addition, glass is part of a modern interior and carries a certain aesthetic load. They can be decorated with accessories: sprats –small metal lattices, bevels –decorative glass elements glued to the inside of the double-glazed window and self-filling stained glass Windows. Glasses can have different transparency and color. I advise you to view the German Windows https://glawindows.com/
What is a double-glazed window?
Double-glazed Windows consist of two or more panes. A remote frame is installed between the Windows. It serves as a kind of frame for a double-glazed window and a bridge of cold. Inside the frame is filled with a special absorbent that prevents the formation of condensation inside the glasses. Previously, only aluminum frames were used in double-glazed Windows. Today, frames made of other materials are installed between the glasses. In the company "Dinal" you can order Windows using foiled plastic remote frames or frames made of plastic + stainless steel. They have a lower coefficient of thermal conductivity. For example, the chromatech ultra remote frame: plastic +stainless steel reduces heat loss by almost 3 times compared to conventional aluminum. Due to the arrangement of two materials in the frame, the "cold place" is reduced, this significantly reduces the possibility of condensation on such a window.
The thickness of the glass in the double-glazed window may be different. Glasses are: 4 mm, 5 mm, 6 mm, 8 mm.
Imagine that if you install different thicknesses of glass at different distances from each other in a single double-glazed window, you can prevent the occurrence of resonance. This is a clever way to install glass in the "window for noise protection". It reduces the noise coming through the window to 45 dB. The secret of this window is not only in the alternation of wide and narrow air chambers, and glass of different thickness. But also in a special coating! The so-called AGC triplex is installed here. This is 2 glasses glued together with a layer of noise-proof film in the middle. The film absorbs sound waves in a wide frequency range. Windows with such glasses are recommended to be installed in apartments and houses located near busy highways, as well as in hospitals and children's institutions. Modern technologies allow you to apply other coatings on glass installed in a double-glazed window. This processing affects the physical properties of the window. For example, top coating –a special low-emissive coating of metal oxides, affects the ability of glass to conduct heat. Windows with this coating retain up to 100% more heat in the house. This treatment does not affect the transparency of the glass and does not disturb the natural lighting of the room.
Again, coated glass can protect a room with Windows on the Sunny side from summer overheating. ClimaGuard Solar glass-retains up to 60% of the solar radiation that heats the surfaces in the room. Therefore, in summer, it will not be hot in a room with Windows that have such glass installed.
Glass that retains heat in the winter and does not pass excess heat in the room in the summer is called–multifunctional. Coatings are installed on the inner part of the double-glazed window on the edge of the glass, so it can not be damaged during operation. They have different transparency and color.
By default, the space between the Windows is filled with air, but if you need to increase the thermal and sound insulation properties of the window, the space between the chambers is filled with gas. Argon is used more often, and krypton is used less often.
So, to the question "which plastic Windows to choose?╗ – the most correct answer is Windows that meet your needs.